- Before ordering, please note that all our products do not include tax, you need to declare your own tax!
- If you need to send UPS/Fedex/TNT/DHL, please contact us. We need to discuss the freight with you.
- Technical questions e-mail：[email protected]
- Sales questions e-mail：[email protected]
-
The trianglelab has always been concerned about product quality.We are developing products and working hard to improve the quality.We will not abandon our reputation because of many cheap products on the market.It is believed that only high quality products can ensure the quality of your work and bring safety to your work.
-
Some of our products may be more expensive than others,but please believe in our quality and believe that you will not regret when you receive the goods.
To purchase a tax-included products, please click the link below：
https://trianglelab.aliexpress.com/store/1654223Swiss CR-10S PRO Hotend KIT Compatible with CR-10S PRO 3D Printer.*Compatible NTC 100K 3950 Thermistorsensor OR 104GT-2 Thermistor sensor Recommended slicer setting:retraction speed over 80MM/Sretraction length 2.5-4MM If you are facing PLA clogging problem, please try the followings:1. Increase the retraction speed. The speed may have being limited in the firmware try to change it. G-command "M203 E200"2. Increase the extruder acceleration. Check your firmware settings. G-command "M201 E9000"3. Reduce the retraction length. It depends on your machine setup.4. Increase the nozzle temperature by 5-10 degrees.5. Do not install the 2 screws for support the heatblcok like the stock hotend on the CR-10 printer.6. Make sure that there is no gap between the heatsink and the heat breaker. ▉Compatible: Compatible with CR-10S PRO(Need to re-adjust height) ♦NOTE:
*If you want to keep the CREALITY original HOTEND of the CR-10S PRO. Then you only need to buy the CR-10S PRO nozzle.
*If you upgrade your machine to SWISS CR-10S PRO HOTEND KIT, you will need to change to MK8 NOZZLE or SWISS MK8 NOZZLE.
If you want to buy MK8 brass nozzles, please click here to buy.If you want to buy MK8 Plated copper nozzles, please click here to buy.If you want to buy MK8 Ruby nozzles, please click here to buy.If you want to buy MK8 Plated Copper Ruby nozzles, please click here to buy.If you want to buy Swiss MK8 brass nozzles, please click here to buy. ▉What's in the box: SET 1- CR-10S PRO HeatSink:·Aluminum CR-10S PRO HeatSink X 1
SET 2 - CR-10S PRO Heat Break:·Titanium Alloy Heat Break X 1
SET 3- CR-10S PRO Upgrade Kit:·Aluminum CR10 HeatSink X 1·Titanium Alloy Heat Break X 1·Gift X 1(1PC CR10 HEAT BLOCK)
▉Photo display:
Please enjoy the excellent quality of art.
*The following is our company's ultra-high temperature 3D printer test
PEEK(USE MK8 RUBY NOZZLE)
PEI 1010(USE Hardened steel V6 NOZZLE)
PEI Mixed material(Plated Copper Test)
